Aerospace Anodize Operator (Trainee) - 2nd Shift
Aerospace Anodize Operator (Trainee) - 2nd Shift
Job Overview
Title: Anodize Operator
Reports to: Production Managers (Value Stream or Shift)
Location: Kent, WA
Type: Full Time, Non-Exempt (hourly)
Schedule: 2nd Shift
Hytek production is open 24 hours per day. All shifts are as follows: 1st shift (Monday – Friday, 6:00 a.m. – 2:30 p.m.), 2nd shift (Monday – Friday, 2:00 p.m. - 10:30 p.m.), 3rd shift (Sunday – Friday, 10:00 p.m. - 6:30 a.m.)
Job Summary
Employees in this position use a variety of methods to process parts in preparation for plating and other coatings. The operators perform operations in accordance with Military and OEM specifications. This is a trainee operator position in our Anodize department. Employees in this position will process a variety of parts in our Anodize department. Anodize Operators may be required to join the Federal Aviation Administration (FAA) DOT Drug & Alcohol Testing Program*. The Anodize Operators perform operations in accordance with Military, Industry and OEM specifications.
* FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Responsibilities
Salary Range for position: $15.74 - $45.00 *Trainee hourly rate generally starts between $18.00 to $22.00 per hour and is based on prior aerospace finishing experience. Experienced anodize operator pay will be reviewed above $21.00 and generally based on total number of years and/or including highest level of education achieved.
Full benefits package includes: Medical, Dental, Vision, 401(k) matching, Profit Sharing Plan, 3-weeks paid time off to start, paid community service day, tuition reimbursement, parental leave, short term disability, long term disability, life insurance, accidental death & dismemberment insurance, long-term care plan options, 10 paid holidays, prescription safety glasses benefit, and onsite health services that includes access to a massage therapist.
Application Process
Please apply at www.hytekfinishes.com/careers with an up-to-date resume and your current contact information. If you are a qualified candidate, we will set you up with a 30-minute phone call with a recruiter to learn more about your experience and to tell you more about the job, compensation, and benefits. The recruiter will reach out should we move forward with the next steps.
Hytek Finishes is an equal opportunity employer. It is Hytek’s policy to make all employment decisions without regard to an individual’s sex, gender (including pregnancy, childbirth, breast feeding, and related conditions), sexual orientation, gender identity, gender expression, race (including traits historically associated with race, including hair texture and protective hairstyles such as braids, locks and twists), creed, religion (including religious dress and grooming), color, national origin, ancestry (including association, affiliation, or participation with persons or activities related to national origin, English-proficiency or accent or immigration status), physical or mental disability, medical condition, genetic information, marital or domestic partner status, age, veteran or military status, and any other categories protected by applicable state, local, or federal law. M/F/Disability/Protected Vet
Job Overview
Title: Anodize Operator
Reports to: Production Managers (Value Stream or Shift)
Location: Kent, WA
Type: Full Time, Non-Exempt (hourly)
Schedule: 2nd Shift
Hytek production is open 24 hours per day. All shifts are as follows: 1st shift (Monday – Friday, 6:00 a.m. – 2:30 p.m.), 2nd shift (Monday – Friday, 2:00 p.m. - 10:30 p.m.), 3rd shift (Sunday – Friday, 10:00 p.m. - 6:30 a.m.)
Job Summary
Employees in this position use a variety of methods to process parts in preparation for plating and other coatings. The operators perform operations in accordance with Military and OEM specifications. This is a trainee operator position in our Anodize department. Employees in this position will process a variety of parts in our Anodize department. Anodize Operators may be required to join the Federal Aviation Administration (FAA) DOT Drug & Alcohol Testing Program*. The Anodize Operators perform operations in accordance with Military, Industry and OEM specifications.
* FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Responsibilities
- Work closely with experienced Anodize Operator to complete work and prioritize tasks for On-Time delivery.
- Follow technique card, customer Purchase Orders and drawings, and instructions from experienced Anodize Operators to prepare and process parts; prepare, understand, and document technique cards.
- Prepare parts prior to operations including racking; use proper tooling and fixtures, when applicable.
- Legibly sign off on work once completed and Operator Self Verification inspection has occurred.
- General review of paperwork and Operator Self Verification inspection of job to ensure all previous operations were completed. Notify supervisor and Quality Assurance if any errors.
- Knowledge of pre and post cleaning surface finish requirements.
- Familiar with Quality Assurance requirements & rework procedures.
- Be familiar with engineering drawing notations.
- Be familiar with the safety precautions & know how to avoid injury to personnel.
- Actively participate in continuous improvement activities to drive positive change in productivity, delivery, and service. Be involved in Kaizen events as needed either as a participant or supporter.
- Maintain the highest ethical standards, even when challenged from above.
- Other duties as assigned.
- May be required to join the FAA Repair Station program, including the FAA Drug & Alcohol random selection pool.
- Required to participate in annual Hearing Conservation testing.
- Ability to wear appropriate Personal Protective Equipment, including safety glasses, hearing protection, and other PPE based upon requirements in working area.
- Demonstrated ability to train and positively influence others.
- Must be a self-starter, able to work both independently, as a team, and with customers (both internally and externally).
- Excellent accuracy with a strong attention to detail.
- Ability to solve tactical and strategic problems and issues arising in this position.
- Ability to learn and use Lean Tools and techniques to solve tactical and strategic problems and issues arising in this position.
- Ability to multi task effectively.
- Must have a regular and dependable attendance record.
- Ability to Read/Write Communicate in English with Customers and auditors.
- Must be authorized to work in the U.S. An export license will be required to work in all areas of the facility.
- 1-2 years in manufacturing environment a plus.
- Ability to lift occasionally up to 63 lbs. occasionally
- Ability to stand and walk frequently
- Ability to sit occasionally
- Ability to reach from the shoulder and overhead occasionally and from the waist frequently
- Ability to bend, stoop, squat, crouch, kneel, occasionally
- Ability to climb stairs and ladders occasionally
- Ability to push/pull frequently
- Ability to pivot, twist, pinch occasionally
- Ability to grasp frequently
- Ability to see/hear/feel constantly – hearing protection required when working in the area
Salary Range for position: $15.74 - $45.00 *Trainee hourly rate generally starts between $18.00 to $22.00 per hour and is based on prior aerospace finishing experience. Experienced anodize operator pay will be reviewed above $21.00 and generally based on total number of years and/or including highest level of education achieved.
Full benefits package includes: Medical, Dental, Vision, 401(k) matching, Profit Sharing Plan, 3-weeks paid time off to start, paid community service day, tuition reimbursement, parental leave, short term disability, long term disability, life insurance, accidental death & dismemberment insurance, long-term care plan options, 10 paid holidays, prescription safety glasses benefit, and onsite health services that includes access to a massage therapist.
Application Process
Please apply at www.hytekfinishes.com/careers with an up-to-date resume and your current contact information. If you are a qualified candidate, we will set you up with a 30-minute phone call with a recruiter to learn more about your experience and to tell you more about the job, compensation, and benefits. The recruiter will reach out should we move forward with the next steps.
Hytek Finishes is an equal opportunity employer. It is Hytek’s policy to make all employment decisions without regard to an individual’s sex, gender (including pregnancy, childbirth, breast feeding, and related conditions), sexual orientation, gender identity, gender expression, race (including traits historically associated with race, including hair texture and protective hairstyles such as braids, locks and twists), creed, religion (including religious dress and grooming), color, national origin, ancestry (including association, affiliation, or participation with persons or activities related to national origin, English-proficiency or accent or immigration status), physical or mental disability, medical condition, genetic information, marital or domestic partner status, age, veteran or military status, and any other categories protected by applicable state, local, or federal law. M/F/Disability/Protected Vet
Department: Boric Anodize-011180
This is a non-management position
This is a full time position
Jobs page provided by 