Rope Access Level 3 Supervisor (Conklin, AB)

• Must have previous Rope Access experience
• IRATA Level 3, multiple Re-certifications preferred
• Must be able to clearly communicate and educate workers, supervision, safety and the client on rope access maneuvers, procedures, best practices, and safety bulletins.
• Secondary trade tickets an asset, preference to red seal insulators
• Work for 12 hours a day in an environment where temperatures may reach from -40° to 40° C, both indoors and outdoors in the sun.
• Must be able to work while suspended in a harness for extended periods of time.
• Work in an environment in which vibrations and noise are moderate to severe and noise level may require the wearing of hearing protection devices.
• Work in confined spaces for 4-7 hours per day; stand or walk for long periods.
• Climb and maintain balance on ladders and scaffolding at extreme heights.
• Stoop, kneel, crouch and crawl.
• Lift and carry objects weighing up to 50 pounds often and occasionally up to 100 pounds.
• Maintain footing on surfaces which are sometimes slippery.
• See well (naturally or with correction) and distinguish colors.
• Hear well (naturally or with hearing aid).
• Must be able to effectively communicate with other employees, supervision, and the client.
• Use arms and hands to reach for, handle, and feel objects; and coordinate well the use of hands or fingers and eyes.
• Must have reliable transportation to and from the work location.
• CSTS and Fall Protection are minimum requirements, other safety tickets as required by site.
• LSE (Leadership for Safety Excellence) training or obtaining of certification within 3 months.
  
   

• Accessing hard to reach areas without scaffold or work platform.
• Utilize specialized knowledge of Rope Access Technology to manage the safety of crews engaged in rope access activities, organize work functions and supervise crews.
• Descend, ascend and transverse ropes for access and work while suspended by harness.
• Perform duties such as inspections, painting touch ups, washing windows, pressure washing, water proofing, insulation, caulking and other kinds of work at height or high angle.
• Must comply with all safety regulations of Brock Canada
• Ensures that work is performed in accordance with Contractor Specifications and/or as directed by the Contractor’s Representative.
• Ensures they are following the applicable Contractor’s Safety Procedures and OH&S regulations
• Perform minor repair/maintenance activities at height or high angle.
• Assures that the proper equipment is being used for the specified tasks.
• Reads specifications, such as blueprints and data, to determine requirements.
• Performing work with co-workers in a safe, responsible, and cooperative manner.
• Required to complete safety paperwork such as FLRA’s, Start Cards, Rescue & Rigging plans, etc.
• Other duties as assigned

This is a full time position